Smoker

Smoker

The Best Ways How To Fix A Broken Glass Pipe

Byking_adm on April 2, 2021

Breaking a bong or a pipe just comes with the territory of owning such devices, and it’s most likely happened to anyone that owns them at least once in their lives. It’s easy to accidentally leave your pipe on your body after you’ve just taken a few tokes, begin standing up, and forgetting that you left the pipe on your leg in the first place. Something like this can not only ruin the mood of a good high, but also the rest of the day. The messier the clean-up, the worse off the mood will be. Glass has a tendency to split apart into a thousand pieces when it breaks. If it does end up into millions of pieces on the floor, then that might not be repairable, but if there is an even break across the pipe, then you could potentially salvage it. Learning how to fix a broken glass pipe will give you a blanket of security, and even more so if your pipe was expensive.

How To Fix A Broken Glass Pipe Or Bong

Bongs and pipes can get pretty expensive, so being very delicate in handling them is mandatory. While the fastest way in getting over a broken pipe is to just go out and purchase a new one, not everyone has the time or money to do that. If you end up breaking your bong or pipe, there are a few ways you can go about trying to repair it.

Try Repairing It With Silicone

Try using food-grade silicone to repair your pipe. This method is dependent on where and what type of break it is. Food-grade silicone can seal the joints on your pipe or bone fairly well, and it is ideal if there is just a clean crack throughout the glass. If your bong is in many pieces, then this method might not work the best.

Try Using Epoxy

Many people have tried using epoxy with some success. Two-component epoxy is the best way to try and secure a long-lasting fix where it won’t just break apart again in the coming weeks. One thing to keep in mind is that when you’re searching around the retail store for epoxy, you need to find one that doesn’t have any solvents in it. Going with a food-grade epoxy is highly recommended.

If your bong has a clean break through it, epoxy will work best in those cases. It might become a little tricky if the crack is all jagged along the edges. In that case, you’ll want to get a glass cutter to smoothen out the crack into a cleaner one. After that, you can sand the crack down and then apply the epoxy so that each piece of the glass will bind to each other.

For glass cracks and breaks that occur near the lower portion of the bong where the water gathers, the water will start to aggravate the epoxy over time, and you’ll notice that leaks will start to happen. To lower the chances of that happening, you’ll want to keep the bong empty when you aren’t using it.

Try Using Duct Tape

If you don’t have the time or money to invest in the epoxy or silicone methods, try just using duct tape. Duct tape tends to work best if you just have a small hairline crack in your pipe or bong. The cracks in the base level of bongs will be much more difficult to tape together, and will at best, be a temporary solution.

Try Using A Bucket

Try using a what?

This might be confusing to those that have never tried it before, but it actually works pretty well. A bucket isn’t the only thing, though. Any type of decently-sized bowl, a bathtub, or even a sink will work.

While this method isn’t exactly a fix, it still lets you use your bong, and it’s super easy. All you have to do is take your bong and situate it in the water. As long as there is an airtight seal in the water, your bong will work just like it did before.

Consider Contacting A Professional

If you really have an attachment with your pipe or bong and don’t want to let it go, then you might want to consider contacting a professional glass repair shop. While this method will definitely cost the most, it will be the best long-term solution to keeping your bong or pipe intact.

If your bong was $400, it’s good to at least look around for quotes and see what the best price is for repairing it. Many people have pipes or bong that are sentimental to them, and sometimes getting them repaired will be cheaper than going out and buying the same piece of glass brand new. If you do go with this option, you’ll need to have it cleaned and in pristine condition before you take it in to get a quote. If you’re not sure how to clean your bong or pipe, there are many guides out there that can help you with that.

Other Ways To Fix Pipes

A lot of the time when you accidentally break your glass pipe, there’s a slim chance that you’ll be able to repair it. While glass bongs can crack or break very easily from being dropped only a tiny bit, glass pipes typically need to undergo some deep impact in order to break.

If you dropped your pipe and it shattered in a million pieces, then you might just want to cut ways with it and purchase a new one. But if you’ve only got a crack in it or just broken a tiny piece of the glass off, there are still ways you can try to repair it.

JB Weld Or Quick Steel

Both Quick Steel and JB Weld will serve the same purpose when repairing your glass pipe. They act like putty that will seal any holes or cracks in your glass. Keep in mind that you don’t bother using this method if the break is anywhere close to the bowl.

Try Using Epoxy

Epoxy is good at binding glass pieces together nice and swiftly. Again, don’t try using this method if your break or crack is close to the bowl on your pipe.

Duct Tape

If the crack or break in the glass isn’t too severe, duct tape can be effectively used to tape it back together. It’s more of a quick fix that shouldn’t be expected to last forever, but it can get the job done, in some cases. It isn’t an overly complicated method, and all you have to do is grab a piece of tape, cut it to length over the crack, and seal it up.

Blow Torch Method

You might want to leave the blow torch method to a professional that has some experience with them. This method requires a bunch of protective equipment, and you could severely injure yourself if you just go ahead and try using this method without any idea what you’re doing.

If you do have some blow torch experience and all of the equipment required to use it safely, then you can consider giving this method a try. Ensure you watch a detailed tutorial on how to do it before you try.

Contact a Professional

Some glass pipes can get very expensive, but the majority aren’t overpriced. If you have a glass piece that did break the bank when you purchased it, then consider getting a quote from a professional before going out and buying another brand new one. You could potentially save some money in getting it repaired in comparison to purchasing new.

The process? All you have to do is look online and see what glassblowers are in your area. Ask them if they can give you quotes on getting it repaired. If you do end up finding one, you’ll need to give it a thorough clean before bringing it in.

What If The Pipe Is Too Far Gone?

Many times your glass piece will just be too far broken to do anything about. Quick fixes don’t last forever, but contacting a pro might be the best way in prolonging the life of your pipe.

Keeping these few methods in mind will give you a better idea of what route to go with when you do end up cracking your pipe, and at some point, it’ll be bound to happen.