imgonline com ua Resize aFgziiIqjjnc auto x1

imgonline com ua Resize aFgziiIqjjnc auto x1

How To Roll A Dutch Master In Under Six Steps

Byking_adm on January 6, 2021

You won’t see Dutch Master blunts as much throughout the West Coast as you would in other areas of the country, but they are a blunt that’s known to burn exceptionally well. Blunts are a great alternative to joints if you don’t happen to have a grinder handy. If you’re one to enjoy swishers, then you’ll most likely enjoy a dutch master blunt. You can learn how to roll a dutch master blunt in as little as eight steps.

Because the dutch material is known to be a little more fragile than other blunt wraps out there, you’ll have to ensure that you’re careful and that the wrap being used isn’t super old. What is a Dutch master, you might ask? A Dutch master is just a cigar that was wrapped with natural tobacco leaves. With regular blunt wraps, you’ll get tobacco leaf that’s pressed together, and this results in a smooth blunt wrap. Natural tobacco leaves look like they have veins in them, just like any other leaf that you see.

Step 1 – Prepare The Materials

There’s a couple of different things you’ll need for the dutch master:

Something to bust up your cannabis with, such as a knife or razor.

Step 2 – Give The Dutch A Lick

You’ll now want to moisten the dutch with your tongue. The glue that’s on the dutch is known to be a lot stronger than other cigars out there, so after you lick it, make sure that it doesn’t touch anything else. Continue busting up your cannabis while you wait for the dutch to bind.

Step 3 – Continue Grinding The Cannabis

You’ll want to ensure there’s no little stems or other debris in the cannabis, as this can potentially create little rips in the dutch.

Step 4 – Removal Of The Natural Leaf

Ensuring that the natural leaf wrap is still slightly wet, but not overly wet, start to peel the outer portion of the wrap from the inner portion of the cigar. If you desire, you can slice off a tiny portion of the cigar and make a flat edge that’s a lot simpler to peel away. This will help you remove the outer wrap more smoothly. Don’t rush this process because there’s a chance of the wrap ripping if you do.

Step 5 – Slice It Open

Get your blade or other sharp object and slice the inner seam of the cigar. The straighter you make this cut, the easier it’ll be to roll up the blunt.

Now, you can get rid of tobacco.

Step 6 – Start To Roll

At this point, you can now add cannabis to the wrap. Using your pointer fingers, push and shape the cannabis into the wrap how you want it. Start to roll the cannabis in a back and forth motion to tighten up the blunt.

If you use the thick edge of the wrap, you’ll have an easier time rolling it. After that, seal both tips of the blunt.

Step 7 – Add-In The Natural Leaf

Give the natural leaf a lick while it’s sitting on a surface that’s nice and flat. Now, you’ll want to start wrapping the leaf right around the blunt in a diagonal motion. If done correctly, it should appear the same how it was in the first place. Use the table as a guide to make sure that everything aligns properly.

After you’ve successfully attached the leaf to the blunt, give it a few minutes to dry off.

Step 8 – Grab Your Lighter And Light It Up

Dutch master blunts will take a little getting used to, but over time and with some practice, they are a very enjoyable way to consume cannabis.